The Raw Driving Data recorder module allows you to collect a large amount of data very frequently. These data can be used for driver behavior analysis or more precise tracking, etc. This chapter describes how to configure the different data to collect.
First of all, the module has be linked to your Munic Box. Then, it supports a more frequent recording policy for the following data:
Note that all the other fields are still retrieved by Munic Box. This module mainly offers the possibility to customize the recording frequency for a given field.
The module must be configured with the following parameters:
|1Hz GPS||Activated / De-activated||De-activated|
|1Hz OBD speed||Activated / De-activated||De-activated|
|1Hz OBD RPM||Activated / De-activated||De-activated|
|1Hz GPS Altitude||Activated / De-activated||De-activated|
By default, no intensive collection is done by the module: a configuration is required to activate each field intensive collection. Indeed, this module consumes more data in terms of SIM card data plan (more data to send) so the customer is responsible of the module configuration.
The Raw Driving Data recorder module mainly uses the default field of Munic Box.
|GPS_SPEED||Stores the last valid speed of the GPS in 1/1000th knots||Integer||3|
|GPS_DIR||Stores the last valid course of the GPS in 1/100th degrees||Integer||3|
|GPS_PDOP||Positional dilution of the precision of the GPS||Integer||1|
|GPS_ALTITUDE||Stores the current altitude in meters||Integer||3|
|GPRMC_VALID||Last validity state of the latest GPS GPRMC frame. 'A' is valid and 'V' is invalid||String||1|
|GPS_FIXED_SAT_NUM||Number of satellites used for the GPS fix||Integer||1|
|MDI_OBD_SPEED||Speed value in km/h obtained from the OBD||Integer||4|
|MDI_OBD_RPM||Engine RPM obtained from the OBD||Integer||4|
*GPS Altitude can be available on demand.